Edelbrock 2010 Manual de instalación descargar pdf (Pagina 30)

Part #1574, 1575, 1576

Brochure #63-1574

Rev. 9/24/14 - QT

Edelbrock GM LS3 Supercharger System for

2010 and later Grand Sport Corvettes

Installation Instructions

Page 22

140. Apply blue loctite to the threads of a 20mm bolt

supplied in Bag #1, then use a 12mm socket and the

supplied washer to mount the pulley on the new lower idler

bracket and torque it to 18 ft-lbs.

141. Use a 10mm socket to remove the three bolts on the

passenger side of the water pump.

142. Use a 6mm Allen tool and the three 90mm bolts

supplied in Bag #1 to install the lower idler bracket on the

water pump then torque them to 18 ft-lbs.

143. Use a 15mm socket and the two stock bolts to mount

the new tensioner bracket onto the water pump then torque

them to 37 ft-lbs.

144. Use an 8mm allen tool to install the 45mm bolt

supplied in Bag #1 that retains the tensioner bracket to the

cylinder head and torque it to 37 ft-lbs.

145. Apply blue loctite to the threads of a 20mm bolt

supplied in Bag #1, then use a 12mm socket and the

supplied washer to mount the pulley on the tensioner

bracket and torque it to 18 ft-lbs.

146. Use a 15mm socket and the 75mm bolt supplied in

Bag #1 to install supplied tensioner on new bracket and

torque it to 37 ft-lbs.

147. Use a 12mm socket and a 20mm bolt supplied in Bag

#1 to mount the EVAP purge solenoid on the back of the

new tensioner bracket.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 40 41

Sin comentarios

Edelbrock 2010 Manual de instalación Pagina 30